MIXPLAST SEMI RIGID EPOXY 36891N 50ML
36891N
Price Exc Tax
Two-component modified epoxy
Orange in colour for repairs to plastics.
Flexible and doesn't lift when sanding down. No air Bubbles
Super smooth surface ready for painting
INSTRUCTIONS ON USE
Working steps on bumper tears:
• Fix the part from the inside(recommended) by melting the 0,75 Inches repair staple ref: 3645 with the MAGIC STAPLER (power selection 35Amp.).
• Cut the staple excess with side cutters. Make V channel on the outside in preparation for the product.
• Remove the paint all around the repair using P120 and sand the channel, matting the shiny surface.
• Remove the paint all around the repair using P120 and sand the channel, matting the shiny surface.
• Clean the surface with adhesion prep cleaner and silicon remover 36021.
• Wipe and dry with a hot air gun to warm the repair area and evaporate the cleaner.
• Wipe and dry with a hot air gun to warm the repair area and evaporate the cleaner.
• Pump a small quantity of 3689 on spatulas, mix correctly both components and spread onto the repair by filling first the channel, then covering all the sanded area.
• Apply some heat if the temperature is low in order to kick start the curing process.
• Sand after 30 minutes @ 21 degrees Celsius or after 15 minutes when using the infra-red lamp for 7 minutes @ 60 degrees.• Proceed with normal paint step process.
FINISHING CREAM AFTER 3608
• Clean with 36021 and dry correctly.
• Mix the 3689 directly on the spatulas.
• Spread directly onto the 3608 repaired part.
• Sand after 30 minutes @ 21 degrees Celsius or after 15 minutes when using the infra-red lamp for 7 minutes @ 60 degrees.
• Proceed with normal paint step process.